Hybridcable
Product
Specs
Application
Flammwidrigkeit:
IEC 60332-1
Gesamtdurchmesser:
ca. 22,6mm
Gewicht:
ca.490kg/km
Temperaturbereich:
-10°C bis +60°C
(während des Betriebes)
-5°C bis +50°C
(während der Verlegung)
Min.Biegeradius:
10 x Kabeldurchmesser
IEC 60332-1
Gesamtdurchmesser:
ca. 22,6mm
Gewicht:
ca.490kg/km
Temperaturbereich:
-10°C bis +60°C
(während des Betriebes)
-5°C bis +50°C
(während der Verlegung)
Min.Biegeradius:
10 x Kabeldurchmesser
1. Kupferdatenkabel
(3 x (4 x 2 x AWG 23/1)
PiMF) 100 Ohm
3. Spannungsversorgung
3 x 1,5 mm² (St)
4. Glasfaserkabel (Break out)
4 G 50/125
5. Kabelseele
(3 x (4 x 2 x AWG 23/1)
PiMF) 100 Ohm
3. Spannungsversorgung
3 x 1,5 mm² (St)
4. Glasfaserkabel (Break out)
4 G 50/125
5. Kabelseele
Zur Datenübertragung und Übertragung von Steuersignalen (im MSR - Bereich). Empfohlen zur Festinstallation im Innen- und Außenbereich, sowie in trockenen und feuchten Räumen.
Unamoured power and control cable 1kV
Product
Specs
Application
1. Conductor: IEC 60228
- stranded copper conductor
2. Insolation: IEC 60092-351
- XLPE plastic
3. Bedding:
- seperator tape
4. Sheath: ICE 60092-359
- polefine plastic
- standard colour black,
other colours on reqest
- stranded copper conductor
2. Insolation: IEC 60092-351
- XLPE plastic
3. Bedding:
- seperator tape
4. Sheath: ICE 60092-359
- polefine plastic
- standard colour black,
other colours on reqest
For fixed installation in most areas and on open deck in ships.
- Flameretardant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Halogenfree
- Lowsmokeemission
1. Conductor: IEC 60092-350
- stranded copper conductor
2. Insolution: IEC 60092-351
- XLPE plastic
3. Bedding:
- filler tape
4. Amour:
- copper wire braid
5. Sheat: IEC 60092-359
- polyolefine plastic, SHF1
- standard colour black,
other colours on request
- stranded copper conductor
2. Insolution: IEC 60092-351
- XLPE plastic
3. Bedding:
- filler tape
4. Amour:
- copper wire braid
5. Sheat: IEC 60092-359
- polyolefine plastic, SHF1
- standard colour black,
other colours on request
For fixed installation in most areas and on free deck of ships and offshore units. The cables are not intended for durable laying in the water.
Screened power and control cable 1kV
Product
Specs
Application
1. Conductor:
- stranded copper conductor
2. Insulation:
- XLPE Plastic
3. Screen:
- drain wire of tinned copper
1,5sqm
- aluminium polyester tape,
coverage 100%
4. Sheath:
- polyolefine plastic, SHF1
- standard colour black,
other colours on request
- stranded copper conductor
2. Insulation:
- XLPE Plastic
3. Screen:
- drain wire of tinned copper
1,5sqm
- aluminium polyester tape,
coverage 100%
4. Sheath:
- polyolefine plastic, SHF1
- standard colour black,
other colours on request
For fixed installation in most
areas and on open deck in
ships, especially when
lightweight cables are needed.
- Flameretardant
- Halogenfree
- Lowsmokeemission
areas and on open deck in
ships, especially when
lightweight cables are needed.
- Flameretardant
- Halogenfree
- Lowsmokeemission
1. Conductor: IEC 60228, class 2
- stranded copper conductor
2. Insulation: IEC 60092-351
- XLPE plastic
3. Bedding:
- filler tape
4. Armour: IEC 60092-350
- copper wire braid,
- coverage > 90%
5. Sheath: IEC 60092-359
- polyolefine plastic, SHF1
- standard colour black,
other colours on request
- stranded copper conductor
2. Insulation: IEC 60092-351
- XLPE plastic
3. Bedding:
- filler tape
4. Armour: IEC 60092-350
- copper wire braid,
- coverage > 90%
5. Sheath: IEC 60092-359
- polyolefine plastic, SHF1
- standard colour black,
other colours on request
For fixed installation in most areas and on open deck in ships.
- Flameretardant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Halogenfree
- Lowsmokeemission
1. Leiter:
Kupfer, rund mehrdrähtig
2. Isolierung:
vernetztes Polyethylen (VPE)
3. Schirm:
Geflecht aus Kupferdrähten
über dem Geflächt befindet
sich eine Folientrennschicht
4. Mantel:
Mischung aus Polyefin SHF1,
schwarz
Kupfer, rund mehrdrähtig
2. Isolierung:
vernetztes Polyethylen (VPE)
3. Schirm:
Geflecht aus Kupferdrähten
über dem Geflächt befindet
sich eine Folientrennschicht
4. Mantel:
Mischung aus Polyefin SHF1,
schwarz
Zur festen Verlegung in allen Räumen und offenen Decks auf Schiffen und Offshore-Einheiten. Die Kabel sind nicht für eine dauernde Verlegung im Wasser bestimmt.
Armoured instrumentation and communication cable
Product
Specs
Application
1. Conductor:
- stranded copper conductor
2. Insulation:
- XLPE plastic
3. Bedding:
- filler tape
4. Armour:
- drain wire copper
- copper wire braid,
coverage > 94%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour grey,
other colours on request
- stranded copper conductor
2. Insulation:
- XLPE plastic
3. Bedding:
- filler tape
4. Armour:
- drain wire copper
- copper wire braid,
coverage > 94%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour grey,
other colours on request
For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering orcable with black outer sheath is recommended.
- Flameretardant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Halogenfree
- Lowsmokeemission
1. Conductor:
- stranded copper conductor
2. Insulation:
- XLPE plastic
3. Separator:
- separator tape
4. Screen:
- drain wire tinned copper
- aluminium polyestercopper
tape coverage 100%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour grey,
other colours on request
- stranded copper conductor
2. Insulation:
- XLPE plastic
3. Separator:
- separator tape
4. Screen:
- drain wire tinned copper
- aluminium polyestercopper
tape coverage 100%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour grey,
other colours on request
For fixed installation in most areas and on open deck in ships, especiallywhen lightweight cables are needed. If the cable is exposed to directsun light protective covering or cable with black outer sheath is recommended.
- Flameretardant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Halogenfree
- Lowsmokeemission
1. Leiter:
Kupfer, rund 7-drähtig
2. Isolierung:
vernetztes Polyethylen (VPE)
3. Verseilung:
Paarweise lagenverseilt
bei 2 Paaren: Sternvierer
4. Schirm:
geflecht aus Kupferdrähten
5. Mantel:
Mischung aus Polyoefin SHF1,
schwarz
Kupfer, rund 7-drähtig
2. Isolierung:
vernetztes Polyethylen (VPE)
3. Verseilung:
Paarweise lagenverseilt
bei 2 Paaren: Sternvierer
4. Schirm:
geflecht aus Kupferdrähten
5. Mantel:
Mischung aus Polyoefin SHF1,
schwarz
Zur festen Verlegung in allen Räumen und offenen Decks auf Schiffen und offshore-Einheiten. Die Kabel sind nicht für eine dauernde Verlegung im Wasser bestimmt.
Fire-resistant unarmoured power and control cable 1kV
Product
Specs
Application
1. Conductor:
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- separator tape
4. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- separator tape
4. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering orcable with black outer sheath is recommended.
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
Starkstromkabel mit Isolationserhalt für Schiffe und Offshore-Einheiten mit Schirm
0,6 / 1kV
0,6 / 1kV
1. Leiter:
Kupfer, rund mehrdrähtig
2. Isolierung:
keramisierender Spezial-
Elastomer-Isolierwerk-
stoff HF S95
3. Innenmantel:
halogenfrei, flammwidrig
Trennschicht auf Folienbasis
4. Schirm:
geflecht aus blanken
Kupferdrähten
5. Mantel:
Mischen aus Polyefin SHF1,
orange
Kupfer, rund mehrdrähtig
2. Isolierung:
keramisierender Spezial-
Elastomer-Isolierwerk-
stoff HF S95
3. Innenmantel:
halogenfrei, flammwidrig
Trennschicht auf Folienbasis
4. Schirm:
geflecht aus blanken
Kupferdrähten
5. Mantel:
Mischen aus Polyefin SHF1,
orange
Zur festen Verlegung in allen Räumen und offenen Decks auf Schiffen und
offshore-Einheiten. Die Kabel sind nicht für eine dauernde Verlegung im
Wasser bestimmt.
Fire-resistant armoured power and control cable 1kV
Product
Specs
Application
1. Conductor
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- separator tape
4. Armour:
- copper wire braid,
coverage > 90%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- separator tape
4. Armour:
- copper wire braid,
coverage > 90%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering orcable with black outer sheath is recommended.
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeressistant
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeressistant
1. Conductor:
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Screen:
- drain wire of tinned copper
1,5sqm
- aluminium polyester tape,
coverage 100%
4. Sheath:
- polyolefine plastic SHF1
- standard colour orange,
other colours on request
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Screen:
- drain wire of tinned copper
1,5sqm
- aluminium polyester tape,
coverage 100%
4. Sheath:
- polyolefine plastic SHF1
- standard colour orange,
other colours on request
For fixed installation in most areas and on open deck in ships, especially when lightweight cables are needed. If the cable is exposed to direct sun light protective covering orcable with black outer sheath is recommended.
- Flameresistant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
- Flameresistant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
Fire-resistant armoured instrumentation and communication cable
Product
Specs
Application
1. Conductor:
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- filler tape
4. Armour:
- drain wire
- copper wire braid,
coverage > 94%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- filler tape
4. Armour:
- drain wire
- copper wire braid,
coverage > 94%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
For fixed installation in most areas and on open deck in ships. If the cable is exposed to direct sun light protective covering orcable with black outer sheath is recommended.
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
1. Conductor:
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- separator tape
4. Screen:
- drain wire tinned copper
- aluminium polyester tape
coverage 100%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
- stranded copper conductor
2. Insulation:
- mica tape
- XLPE plastic
3. Bedding:
- separator tape
4. Screen:
- drain wire tinned copper
- aluminium polyester tape
coverage 100%
5. Sheath:
- polyolefine plastic, SHF1
- standard colour orange,
other colours on request
For fixed installation in most areas and on open deck in ships.If the cable is exposed to direct sun light protective covering orcable with black outer sheath is recommended.
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
- Flameretardant
- Fire-resistant
- Halogenfree
- Lowsmokeemission
1. Leiter:
Kupfer, rund 7-drähtig
2. Isolierung:
Keramisierender Spezial-
Elastomer-Isolierwerkstoff
HF S95
3. Verseilung:
paarweise lagenverseilt
bei 2 Paaren: Sternvierer
4. Aderumhüllung:
Polyesterfolie und
Gewebeband
5. Gesamtschirm:
Geflecht aus blanken
Kupferdrähten
6. Mantel:
Mischung aus Polyefin SHF1
Kupfer, rund 7-drähtig
2. Isolierung:
Keramisierender Spezial-
Elastomer-Isolierwerkstoff
HF S95
3. Verseilung:
paarweise lagenverseilt
bei 2 Paaren: Sternvierer
4. Aderumhüllung:
Polyesterfolie und
Gewebeband
5. Gesamtschirm:
Geflecht aus blanken
Kupferdrähten
6. Mantel:
Mischung aus Polyefin SHF1
Zur fen Verlegung in allen Räumen und auf freien Decks von Schiffen und Offshore-Einheiten. Die Kabel sind nicht für eine dauernde Verlegung im Waser bestimmt.
